| Русский Русский | English English |
   
Главная Архив номеров
28 | 03 | 2024
2015, 09 сентябрь (September)

DOI: 10.14489/hb.2015.09.pp.003-005

Савин И. А., Леушин И. О., Ульянов В. А., Леушина Л. И.
ТЕОРЕТИЧЕСКАЯ ОЦЕНКА ТРЕЩИНОСТОЙКОСТИ ОБОЛОЧКОВЫХ ФОРМ ТОЧНОГО ЛИТЬЯ, ИЗГОТОВЛЕННЫХ С ПРИМЕНЕНИЕМ ТЕХНОЛОГИИ НИЗКОТЕМПЕРАТУРНОГО ПРОКАЛИВАНИЯ
(c. 3-5)

Аннотация. Cравниваются предлагаемая авторами технология низкотемпературного прокаливания оболочковых форм литья по выплавляемым моделям и базовая технология их изготовления. На основании теоретической оценки рисков получения бракованных отливок выявлен факт повышения трещиностойкости оболочковых форм, изготовленных с применением технологии низкотемпературного прокаливания.

Ключевые слова: литье по выплавляемым моделям; оболочковая форма; трещиностойкость; низкотемпературное прокаливание.

 

Savin I. A., Leushin I. O., Ulyanov V. A., Leushina L. I.
THEORETICAL EVALUATION OF CRACK RESISTANCE OF INVESTMENT CASTING SHELL MOLDS MADE WITH LOW-TEMPERATURE FIRING
(pp. 3-5)

Abstract. This paper compares the suggested by the authors low-temperature firing technique for making investment casting shell molds with the basic technique for their production. Resting on the theoretical evaluation of the risks of making scrapped castings, one has revealed the fact of a rise in the crack resistance of shell molds produced with application of low-temperature firing technology. In recent years, traditional or basic technology of precision investment casting is subjected to a thorough inspection and reassessment. Primarily this is due to its high resource-intensive, serious obstacles to widespread use of current production. In this regard, the development of any interest to reduce energy and material consumption process, ensuring its environmental safety and resource conservation in the implementation.

Keywords: Investment casting; Shell mold; Cracking resistance; Low-temperature firing.

Рус

И. А. Савин (Казанский государственный технический университет им. А. И. Туполева)
И. О. Леушин, В. А. Ульянов, Л. И. Леушина (Нижегородский государственный технический университет им. В. Е. Алексеева) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

Eng

I. А. Savin (Kazan State Technical University A. N. Tupolev)
I. O. Leushin, V. A. Ulyanov, L. I. Leushina (Nizhny Novgorod University V. E. Alekseev) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

Рус

1. Леушина Л. И., Палавин Р. Н. О низкотемпературном прокаливании оболочковых форм // Литейное производство. 2012. № 12. С. 27–28.
2. Manning C. R., Linekack L. D. The Role of Surface Energy on Thermal Shock of Ceramic Materials // Surface and Interface: Glas and ceram. NY–London, 1974. P. 473 – 490.
3. Hasselman D. P. H. United Theory of Thermal Shock Fracture Initiation Crack Propagation in Brittle Ceramics // Amer. Ceram. Soc. 1969. V. 52, № 11. Р. 600 – 604.
4. Александров В. М., Кулаков Б. А., Лонзингер В. А. Повышение термостойкости оболочковых форм для отливок турбоколес // Литейное производство. 1984. № 4. С. 19 – 21.
5. Лейбензон Л. С. Движение природных жидкостей и газов в пористой среде. М.–Л.: ОГИЗ, 1947. 244 с.
6. Васин Ю. П., Лонзингер В. А. Расчет термостойкости оболочек при литье по выплавляемым моделям // Литейное производство. 1987. № 2. С. 20–21.
7. Шпиндлер С. С., Неуструев А. А., Мамлеев Р. Ф. Исследование термомеханических свойств оболочковых форм по выплавляемым моделям // Литейное производство. 1983. № 3. С. 19–20.
8. Будников П. П., Полубояринов Д. Н. Химическая технология керамики и огнеупоров: учебник. М.: Издательство литературы по строительству, 1972. 553 с.
9. Васильев Л. Л., Танаева С. А. Теплофизические свойства пористых материалов. Минск: Наука и техника, 1971. 265 с.
10. Зальцман Э. С. Теплообмен отливки и формы. Электросталь: ЭПИ МГИСиС, 2006. 260 с.
11. Гавариев Р. В., Леушин И. О., Савин И. А. Проблема прогнозирования эксплуатационного ресурса пресс-форм литья под давлением цинковых сплавов и некоторые пути ее разрешения // Справочник. Инженерный журнал. С приложе-нием. 2013. № 6.

Eng

1. Leushina L. I., Palavin R. N. Low-temperature calcination of the shell forms. (2012). Liteinoe Proizvodstvo, (12), pp. 27-28.
2. Manning C. R., Linekack L. D. (1974). The role of surface energy on thermal shock of ceramic materials. Surface and Interface: Glas and ceram. NY–London, pp. 473-490.
3. Hasselman D. P. H. (1969). United theory of thermal shock fracture initiation crack propagation in brittle ceramics. Amer. Ceram. Soc., 52(11), pp. 600-604.
4. Aleksandrov V. M., Kulakov B. A., Lonzinger V. A. (1984). Improving the heat resistance of shell moulds for casting the turbine wheels. Liteinoe proizvodstvo, (4), pp. 19-21.
5. Leibenzon L. S. (1947). Natural movement of liquids and gases in a porous medium. Moscow–Leningrad: OGIZ.
6. Vasin Iu. P., Lonzinger V. A. (1987). Calculation of the thermal stability of membranes during the casting process based on casted models. Liteinoe proizvodstvo, (2), pp. 20-21.
7. Shpindler S. S., Neustruev A. A., Mamleev R. F. (1983). Study of thermo mechanical properties of shell shapes based on casted models. Liteinoe proizvodstvo, (3), pp. 19–20.
8. Budnikov P. P., Poluboiarinov D. N. (1972). Chemical technology of ceramics and refractory materials: textbook. Moscow: Izdatel'stvo literatury po stroitel'stvu.
9. Vasil'ev L. L., Tanaeva S. A. (1971). Thermophysical properties of porous materials. Minsk: Nauka I tekhnika.
10. Zal'tsman E. S. (2006). The heat of the casting and forms. Elektrostal': EPI MGISiS.
11. Gavariev R. V., Leushin I. O., Savin I. A. (2013). Opera-tional firmness of compression moulds of moulding under the pres-sure of zinc alloys. Spravochnik. Inzhenernyi zhurnal. (6).

Рус

Статью можно приобрести в электронном виде (PDF формат).

Стоимость статьи 350 руб. (в том числе НДС 18%). После оформления заказа, в течение нескольких дней, на указанный вами e-mail придут счет и квитанция для оплаты в банке.

После поступления денег на счет издательства, вам будет выслан электронный вариант статьи.

Для заказа статьи заполните форму:

Форма заказа статьи



Дополнительно для юридических лиц:


Type the characters you see in the picture below



.

Eng

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

.

.

 

 
Поиск
Кто на сайте?
Сейчас на сайте находятся:
 45 гостей на сайте
Баннер
Баннер
Rambler's Top100 Яндекс цитирования